How to Set Up and Configure Your Anavio Hardware and Software

Instructions:

1. Before You Start: Getting Started with Your Reader
   • This guide will walk you through the system, network, and tool requirements, along with recommendations before setting up or installing a Reader.
2. Before You Start: Getting Started with Your Cameras (Bullet, Dome, Micro Dome, Corner & Fisheye)
   • This guide will walk you through the system, network, and tool requirements, along with recommendations before setting up or installing a Camera.
3. Setting up your Anavio account and adding devices
   • Once your device is up and running and connected to the required accessories, this article will guide you through the setup of the Anavio platform.
4. System Setup and User Enrollment:
   • Create Your First Group: Follow the Group Management Guide to learn how to create or manage an access group.
   • Set a Schedule: Use the Adding Schedules Guide to schedule door access times and ensure your reader device is enrolled.
   • Manage Users: Refer to the User Management Guide to view, add, or modify user information (admin or access users).
   • Assign Credentials: Follow the steps in Managing Credentials to add, delete, or modify user credentials (face template, card, mobile, or cloud key).

   • Note: If you are not the master admin user and need an admin account to access the software, create a new user and grant portal access. This will send an email with access to the Anavio portal.

5. Test and Verify Enrollment:

   1. • Perform an access attempt to confirm that your enrollment is complete. The device should grant access and notify you by turning the LED green, while recording to the access log. If this doesn't happen, please contact our support team or your account manager.

   ---

   Appendix: Understanding Your Reader

   Refer to the Status Color Guide for descriptions of the Unified Intercom Reader status indicators.